Vibro-meter 200-560-000-112 MPC4 Machinery Protection Card

1、 Channel configuration
4-channel programmable dynamic input channels Ch1~Ch4
2-channel Tacho speed/key phase channel Ch5, Ch6
Sensor compatibility: eddy current displacement probe, velocity sensor, acceleration sensor, dynamic pressure sensor
Measurable parameters: shaft relative vibration, absolute vibration, thrust axial displacement, eccentricity, casing expansion, sensor clearance, dynamic pressure
The signal can be shared with CMC16 for spectrum and order analysis through rack Raw Bus
2、 Signal and DSP processing specifications
Dynamic channel bandwidth: 0.25 Hz~20 kHz
Tacho key phase input: 1Vp~24Vp; 0.25Hz~10kHz； Optional rising/falling edge; Support multiple pulses per revolution, phase measurement, and fractional speed ratio
Dual DSP real-time operation: digital filtering, integration/differentiation, RMS/peak/peak to peak, gap calculation, order tracking (amplitude+phase)
Alarm configuration: Alert warning and Danger two-level limit values; Support alarm delay, hysteresis, and alarm locking; Support speed adaptive alarm curve (critical speed automatic adjustment protection threshold)
The front panel BNC buffers the original signal output, and external instruments can be used for waveform observation during on-site debugging
Front panel LED: power, operation, channel fault, alarm indicator lights
Channel self diagnosis: real-time diagnosis of disconnection, sensor failure, and signal exceeding limits
3、 I/O and Relays (Complete MPC4+IOC4T DM Module)
IOC4T backend card: sensor power supply, buffer signal output, 0-10V analog voltage/4-20mA current output
IOC4T integrated protection relay: independent channel alarm relay, configurable to connect to unit safety trip interlock circuit
All alarm signals and measurement data are uploaded to the CPUM main control card through the VME backplane
MPC4 itself does not have a network port; External Ethernet Modbus TCP is provided uniformly by CPUM+IOCN DM module
4、 Bus and hardware characteristics
VME backplane bus: communicates with CPUM, uploads measurement values, alarm status, and event logs
Support hot swapping, One Shot automatically loads rack configuration after replacing the board
Power supply: Backboard+5VDC
+5V power consumption: approximately 12W
Specification: 6U Eurocard (front card)
Dimensions: Height 262 mm; Width 20 mm; Depth 187 mm
Weight: Approximately 0.34 kg
PCB with conformal coating, resistant to moisture, salt spray, dust, and slightly corrosive gases
5、 Environmental parameters (three proof version)
Working temperature: -20 ℃~+65 ℃
Storage temperature: -40 ℃~+85 ℃
Relative humidity: 0~90% RH, no condensation
EMC meets the API670 rotating machinery protection industry standard

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

LAM 853-040482-525 | RF MATCH ASSY
LAM 853-041348-780 | RF MATCH ASSY
LAM 853-041348-781 | RF MATCH ASSY
LAM 853-042958-232 | RF MATCH ASSY
Lam Research 853-085372-114 Power Supply | Semiconductor Spare Parts
Lam Research 853-085375-015 Power Supply | Semiconductor Spare Parts
Lam Research 853-190023-001 Hard Drive Assembly with Controller PCB
LAM 810-802969-002 | NODE 1 PM COMMON / Node1 Mainboard

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550