Vibro-meter 200-566-000-012 VM600 IOCN Communication I/O Card

The VM600 rack IOCN communication interface card is paired with CPUM and serves as an external gateway for the rack. It is used for communication between the unit protection system and DCS, as well as upper level VibroSight/MPS software. The ECR-IOCN-V112 you checked last is a different firmware version of the same IOCN series, with 200-566-000-012 being the standard hardware version IOCN.
hardware interface
2-channel independent Ethernet (dual network redundancy)
3-channel serial interface: RS232/RS422/RS485, can run simultaneously
Front panel: Status LED, AR alarm reset button
Support communication protocols
Modbus TCP、Modbus RTU、PROFINET
Responsible for uploading vibration, displacement, speed, alarm, SOE events, waveform spectra; Receive the rack configuration and parameter download of MPS software (One Shot one click configuration of the entire MPC4/AMC8)
Electrical parameters
Power supply: The VME backplane is taken from the RPS6U power supply (SIM-330A/SIM-275D-48),+5V, ± 12V
Typical power consumption: about 12W
Environmental and mechanical specifications
Working temperature: -20 ℃~+70 ℃
Storage temperature: -40 ℃~+85 ℃
Humidity: 5% to 95%, no condensation, IEC60068
Board specifications: 6U, 12TE, VME Eurocard, hot swappable, ABE04x rack front plug-in
Weight: Approximately 0.3kg
Core functionality
Rack gateway: VM600 internal protection card ↔ DCS/PLC/upper monitoring
Whole machine rack configuration management: MPS software is downloaded and configured to MPC4 (275-304-110-012) and other protection cards through IOCN
Event log, SOE sequence event recording, alarm management, local alarm reset
Dual network redundancy, automatic switching in case of network failure, improving communication reliability
Supporting Instructions
IOCN (200-566-000-012) cannot work independently and must be paired with a CPUM card to form a rack controller pair;
Supports rack 1+1 redundant controller configuration (dual CPUM+dual IOCN);
Compared with ECR-IOCN-V112: The hardware itself is the same, only the firmware version number is different, and the hardware parameters are completely the same. Pay attention to firmware compatibility in the project.

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

Vibro-meter SIM-275D-48 200-582-300-011 Power Supply Module

Vibro-meter 204-691-000-021 Vibration Processor Module

Vibro-meter 200-570-000-111 Processor Module

Vibro-meter 200-560-000-113 Processor Module

Vibro-meter 200-595-100-014 Processor Module

Vibro-meter 200-500-110-014 System Rack

Vibro-meter 204-040-100-012 System Rack

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550