You are here:

Vibro-meter ECR-IOCN-V112 200-566-000-112 Communication Board

Manufacturer:Vibro-Meter

model name:ECR-IOCN-V112 200-566-000-112

Country of Origin: Finland (FI)

Estonia (EE)

Customized: Yes

Minimum order quantity: 1 piece

Order multiplier: 1 piece

Part type: New

WhatsApp:15359213550
WeChat:15359213550

Vibro-meter ECR-IOCN-V112 200-566-000-112 Communication Board

The IOCN network communication I/O card of the VM600 unit protection/status monitoring system must be paired with the CPUM for use as a rack gateway, enabling data exchange between the MPC4/AMC8 protection cards inside the rack and external DCS, SCADA, and upper computer, used for rotating machinery protection systems such as steam turbines and compressors.
Core hardware and communication parameters
Onboard interface
2 independent Ethernet ports (primary/backup dual network, supporting network redundancy)
Multi channel serial interface: RS232/RS422/RS485, supports multi node RS485 bus networking
Supported Protocols
Modbus TCP、Modbus RTU、PROFINET
Can upload vibration, displacement, speed, alarm, event logs, waveform spectrum data; Parameter configuration and alarm reset instructions can also be issued
Backplane bus: VME bus, inserted into ABE04x 6U rack, coordinated with CPUM to manage the entire card system, supports MPS software for one click configuration of all protection cards in the rack (One Shot)
Panel: Status LED indicator light, alarm reset AR button, allowing local viewing of alarm status
Electrical parameters
Power supply: Powered by the rack backplane VME bus,+5V, ± 12V (from RPS6U power supply, SIM-275D/SIM-330A)
Power consumption: typically around 12W
environmental parameters
Working temperature: -20 ℃~+70 ℃
Storage temperature: -40 ℃~+85 ℃
Humidity: 5% to 95% without condensation, meeting IEC60068 standards
EMC: Industrial anti-interference design, protecting vibration acquisition signals from on-site electromagnetic interference
Mechanical Specifications
Specification: 6U, 12TE, VME plug-in board, VM600 rack mounted front installation
Weight: Approximately 0.3kg
Core Function Overview
Rack gateway: VM600 internal protection card ↔ Bridge of DCS/PLC/upper monitoring system
Data collection and forwarding: vibration, shaft displacement, speed, key phase, temperature, alarm events, fault diagnosis waveform upload
System configuration: MPS software downloads, configures, and sets alarm thresholds for MPC4 and AMC8 in the rack through IOCN
Event and alarm management: alarm recording, SOE events, local alarm reset button
Network redundancy: dual Ethernet ports, supporting dual network redundancy, improving system communication reliability
Supporting Instructions
IOCN cannot be used alone and must be paired with a CPUM card to form a controller pair;
Same rack power supply refers to the SIM-330A (AC) or SIM-275D-48 (48VDC) RPS6U power supply that you checked earlier;
Different versions of the same series have different tail numbers to distinguish channel/firmware versions, and V112 is the firmware version of this model.


Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,

Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models:

Vibro-meter SIM-275D-48 200-582-300-011 Power Supply Module

Vibro-meter 204-691-000-021 Vibration Processor Module

Vibro-meter 200-570-000-111 Processor Module

Vibro-meter 200-560-000-113 Processor Module

Vibro-meter 200-595-100-014 Processor Module

Vibro-meter 200-500-110-014 System Rack

Vibro-meter 204-040-100-012 System Rack

 

 

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models:

810-068158-013 810-082745-003 810-234640-213 853-049542-173
810-068158-014 810-099175-011 810-270556-001 853-064887-006
810-069751-103 810-102361-222 810-495586-001 853-064887-402
810-069751-114 810-17030-005 810-800031-300 853-286086-100
810-072907-005 810-17059-1 810-800081-005 853-801876-015
810-073479-215 810-17082-001 810-800081-018 880-12537-101

 

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550