Vibro-meter 200-530-026-014 Condition Monitoring Module

1、 Core channel capability
Total channel: 16 parallel configurable dynamic channels
Ch1~Ch4: Can be configured as Tacho key phase/speed channel or dynamic vibration channel
Ch5~Ch16: Can be configured as dynamic vibration channel or DC process analog channel
Sensor compatibility: eddy current displacement probe, velocity sensor, acceleration sensor, thermocouple, DC voltage signal
Sampling mode: synchronous order tracking sampling+asynchronous fixed frequency sampling, synchronous acquisition of all channels
FFT: High resolution spectrum with up to 3200 lines; Refresh spectrum as fast as 500ms
Each channel: up to 10 configurable frequency bands; Each frequency band supports 6 independent alarm limits with hysteresis and delay settings
Onboard cache: supports scheduled recording, alarm trigger recording, and event snapshot; MPC4 protection card signal can be read through the backplane Raw Bus/Tracho Bus
2、 Signal and measurement specifications
ADC: 16 programmable anti aliasing filters+parallel ADC
Frequency range: 0.25 Hz~20 kHz
Tacho speed/key phase: rising/falling edge optional; Input amplitude 1-24Vp; 0.25Hz~10kHz; Up to 128 pulses per revolution, supporting phase measurement
Calculated parameters: vibration RMS/peak value/peak to peak value, phase, order, gap, temperature, process quantity
Alarm logic: independent channel alarm, hysteresis, delay; Alarm is only used for status monitoring and does not drive unit protection tripping (MPS protection is handled by MPC4 card)
3、 Onboard communication and bus
VME backplane bus: communicates with rack CPUM (200-595-072-322), uploads measurement data, spectrum, and event logs
Onboard optional RS485: Modbus RTU
Front panel three color LED: power, operation, channel alarm/fault status indication
CMC16 has no network port, and network communication is output externally by the entire DM module of CPUM+IOCN
4、 Electrical parameters
Power supply: Backboard+5VDC ± 5%
+5V power consumption: 15W
Support hot swapping, the rack automatically loads One Shot configuration after replacement
5、 Mechanical dimensions
Specification: 6U Eurocard
Height: 262 mm; Width: 20 mm; Depth: 187 mm
Weight: Approximately 0.35 kg
6、 Environmental parameters
Working temperature: -25 ℃~+65 ℃
Storage temperature: -40 ℃~+85 ℃
Humidity: 0~90% RH, no condensation
EMC industrial grade, meeting the monitoring standards for rotating machinery

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

LAM 853-040482-525 | RF MATCH ASSY
LAM 853-041348-780 | RF MATCH ASSY
LAM 853-041348-781 | RF MATCH ASSY
LAM 853-042958-232 | RF MATCH ASSY
Lam Research 853-085372-114 Power Supply | Semiconductor Spare Parts
Lam Research 853-085375-015 Power Supply | Semiconductor Spare Parts
Lam Research 853-190023-001 Hard Drive Assembly with Controller PCB
LAM 810-802969-002 | NODE 1 PM COMMON / Node1 Mainboard

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550