Vibro-meter VM600 200-560-000-114 Machinery Protection Card

✅ Channel resources
4 dynamic measurement channels CH1~CH4+2 independent speed/key phase Tacho channels
Free configuration of 4 dynamic channel software:
Eddy current probe: shaft relative vibration, shaft displacement, thrust position, eccentricity, differential expansion
IEPE accelerometer: absolute vibration of bearings
Speed sensor, dynamic pressure signal
Each channel has two independent thresholds: Alert warning and Danger tripping; Support amplitude RMS、 Peak to peak value Smax、 Phase and order tracking measurement; Alarm delay, hysteresis, and latch can be set, supporting adaptive threshold based on speed
Front panel 4-channel BNC buffered waveform output, used for on-site oscilloscope debugging of raw sensor waveforms
Onboard sensor excitation power supply, compatible with eddy current probes/IEPE piezoelectric sensors
✅ DSP protection core (API670)
Onboard independent DSP, protection decision is completed locally in MPC4, without relying on CPUM rack controller, meeting the independent safety requirements of unit protection
Maximum sampling rate: 51.2kHz; Measure bandwidth DC~20kHz; BNC buffer output bandwidth DC~60kHz
Hardware trip response time:<1ms
Built in complete channel diagnosis: probe disconnection, short circuit, sensor power supply failure, board hardware failure, can report to the police
Support hot plugging: The rack can be plugged and unplugged with power on, which will not affect the protection operation of other protection cards inside the rack
✅ Electrical input specifications
Dynamic input: AC maximum ± 10V; DC ± 20V
Common mode voltage range: -50~+50 V
CMRR > 60dB @50Hz； Channel crosstalk -72dB
Input impedance: 200k Ω
Current input: DC 0~25mA, AC maximum ± 8mA
✅ Supporting backplane IOC4T (paired with MPC4 one by one)
IOC4T backplane IO card provides:
4-channel SPDT (Form C) relay, hardware jumper selection NE (Normal Energized)/NDE (Normal De energized), hard interlock output
4-channel 4-20mA analog output, send measured values to DCS
All sensor wiring terminals
OC Bus interface, output alarm signal to drive RLC16 relay expansion card
Raw Bus bus for IRC4 intelligent relay card to read alarm signals and perform local voting logic
✅ Core Bus
VME bus: communicates with CPUM/IOCN, uploads measurement data, alarms, and event logs
OC Bus: Output switch alarm signal to drive RLC16 backplane relay expansion
Raw Bus: Used for IRC4 intelligent relay card to read the alarm status of this card and implement local voting logic such as 2oo3
✅ physical parameters
Board type: 6U Eurocard, single width card, width 20mm, depth 187mm
Weight: Approximately 0.4 kg
Installation: ABE040/ABE042/ABE056 rack front panel slot; IOC4T is installed in the corresponding slot of the backplane
✅ Environmental specifications
Working temperature: -25 ℃~+65 ℃
Storage temperature: -40 ℃~+85 ℃
Relative humidity: 0~90%, no condensation; Meets the IEC61000 EMC industrial electromagnetic compatibility standard

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

Vibro-meter PLD772 Power Supply Module

Vibro-meter 254-772-010-064 Rack Redundant Power Module

Vibro-meter 275-304-000-012 VM600 CMC16 Condition Monitoring Card

Vibro-meter IOC4T 200-560-000-019 I/O Interface Card

Vibro-meter 200-566-101-013 Vm600 Communication Board

Vibro-meter 200-566-000-012 VM600 IOCN Communication I/O Card

Vibro-meter 275-304-110-012 Machinery Protection Card

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550