EPRO A6110 Shaft Relative Vibration Monitor

1、 Channels and inputs
2-channel independent eddy current displacement input (dedicated to eddy current sensors), BNC interface, compatible with EPRO eddy current probes such as PR6422/PR6423/PR6424/PR6426
Measurement quantity: shaft relative vibration (peak to peak value), can be used for spectrum, 1X/2X/1/2X amplitude and phase analysis
Input type: Eddy current sensor dynamic displacement signal
Front panel: Two buffered outputs of raw signals, convenient for external oscilloscope to collect raw waveforms
2、 Measurement and Accuracy
Measurement range: Software configuration, typical 0-500 μ m (configurable)
Accuracy: ± 1% of full scale
Frequency bandwidth: approximately 0.5Hz to 10kHz
Built in sensor disconnection/short circuit self-test, probe fault diagnosis
Supports phase measurement and can output order components (1X, 2X, 1/2X)
3、 Output
Analog output (per channel): 4-20mA or 0-10V DC, configurable, with open circuit and short circuit protection
Relay alarm: Alert+Danger, relay contacts can be set to normally open/normally closed with delay and alarm hysteresis
Backplane bus: communicates with CSI6500 rack and uploads data to AMS upper software
Front panel LED: OK, alarm status indicator light
4、 Power supply and physical specifications
Power supply: 24VDC, maximum power consumption of about 6W, maximum current of 250mA
Board specification: 3U Euro card, single slot, supports hot swapping, non-stop replacement
Dimensions: Width 30mm x Height 128.4mm x Depth 160mm; Net weight approximately 320g
Isolation: Channel to channel and channel to backplane electrical isolation
5、 Environmental parameters
Working temperature: 0 ℃~+65 ℃
Storage temperature: -30 ℃~+85 ℃
Relative humidity: 5~95%, no condensation
Resistance to vibration and impact meets IEC68-2; EMC complies with EN50081-1/EN50082-2
6、 Certification and Software
Standard: API 670
Supporting software: AMS Suite/CSI 6500 configuration software, which can configure alarm values, filtering, delay, relay logic, waveform/spectrum recording
Communication: The internal backplane bus of the rack allows the system to be connected to DCS/Modbus as a whole

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

Vibro-meter PLD772 Power Supply Module

Vibro-meter 254-772-010-064 Rack Redundant Power Module

Vibro-meter 275-304-000-012 VM600 CMC16 Condition Monitoring Card

Vibro-meter IOC4T 200-560-000-019 I/O Interface Card

Vibro-meter 200-566-101-013 Vm600 Communication Board

Vibro-meter 200-566-000-012 VM600 IOCN Communication I/O Card

Vibro-meter 275-304-110-012 Machinery Protection Card

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550