Vibro-meter 200-530-025-014 Conformal Coating Card

1、 Core hardware parameters
Processor: AMD Geode LX800 @ 500MHz
Memory: 256MB DRAM; Onboard non-volatile flash memory, storing up to 10000 system/alarm event logs
Operating System: QNX Real time Operating System
Front panel: small LCD display screen+operation buttons for local viewing of rack status and alarm information; RS232 debugging port; Dual redundant Ethernet Modbus TCP
Board specification: 6U Eurocard, rack front slot
Power Supply: Backpanel 24VDC power supply, onboard+5V; overall module power consumption is approximately 12W
The PCB with conformal coating is the biggest difference between this PN and the regular version CPUM
2、 Communication (CPUM+IOCN complete DM module)
Front panel dual Ethernet ports ETH1/ETH2: redundant Ethernet, Modbus TCP， Docking with DCS/upper VibroSight
Isolation serial port (IOCN output): RS232/RS485, Modbus RTU dip switch
IOCN also comes with 5 system dry contact relays: Rack OK, Alert, Danger, Rack Fault, Comm Fault; Contact capacity: 250VAC/30VDC, 2A
VME Backplane Bus: Manage all acquisition cards such as CMC16 and IOCT16T in the rack, and issue One Shot rack configurations
3、 System functions
Rack global management: time synchronization, unified configuration distribution, and status inspection of all boards
Event records: Alarm, system failure, configuration change logs are stored locally and can be exported through software
Rack public alarm reset AR; two-level security lock permission management for hardware and software
Support dual CPUM+IOCN redundant hot backup (primary backup switching)
Supporting software: MPSx rack configuration software, VibroSight status monitoring software
4、 Environmental parameters (key points of the three proof version)
Working temperature: -20 ℃~+60 ℃
Storage temperature: -40 ℃~+85 ℃
Relative humidity: 0~90% RH, no condensation
PCB triple protection coating, resistant to moisture, salt spray, and slightly corrosive gases; Suitable for offshore platforms and chemical sites
EMC meets the industrial standards for rotating machinery protection systems

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

LAM 853-040482-525 | RF MATCH ASSY
LAM 853-041348-780 | RF MATCH ASSY
LAM 853-041348-781 | RF MATCH ASSY
LAM 853-042958-232 | RF MATCH ASSY
Lam Research 853-085372-114 Power Supply | Semiconductor Spare Parts
Lam Research 853-085375-015 Power Supply | Semiconductor Spare Parts
Lam Research 853-190023-001 Hard Drive Assembly with Controller PCB
LAM 810-802969-002 | NODE 1 PM COMMON / Node1 Mainboard

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550