Vibro-meter IOCT16T 200-565-000-013 Digital I/O Interface Card | VM600 TSI Spare Part

1、 Channel configuration (core)
Total channel: 16 differential input channels, channel function defined by DIP switch
Ch1~Ch4: Can be configured as speed/key phase Tacho channel or dynamic vibration channel
Ch5~Ch16: Can be configured as dynamic vibration channel or process analog channel
Terminal: 48 position screw type terminal block, full channel EMI protection, surge protection
Signal source compatibility: eddy current proximity probe, velocity sensor, acceleration sensor, thermocouple, DC process signal
2、 Tacho channel parameters for rotational speed/key phase
Trigger: Rising edge/falling edge optional
Input amplitude: 1Vp~24Vp, AC coupling ± 24V
Frequency range: 0.25 Hz~10 kHz
Maximum number of pulses per revolution: 128 (speed calculation); Keyphase only supports 1 pulse per revolution
Minimum pulse width: 10 μ s; Minimum rising edge: 4 V/μ s
Maximum common mode voltage: 50 V
3、 Vibration and Analog Dynamic Input Parameters
Measurement accuracy:
AC voltage: 1% FSD at full range
DC voltage: 1% FSD at full range
DC current: Full range 2% FSD (external precision resistor can reach 1% FSD)
AC full range gear (dial switch): 0.1/0.2/0.5/1.0/2.0/4.0/10.0/20.0 V FSD
DC range: 0~+24V/-24~0V; Thermocouple specific range 61.022 mV FSD
Frequency upper limit: maximum 20kHz; AC high pass 0.16Hz (-3dB); DC low-pass 0.2Hz (-3dB)
Signal to noise ratio:>70dB (≤ 10kHz); ＞60dB（20kHz）
Channel crosstalk suppression:<-75 dB
Input impedance: 200 k Ω
Maximum common mode voltage: vibration/process input 50V; thermocouple input 3V
4、 Communication bus
VME bus: D16/A24 Slave, transmission rate 1MB/s, converted to Ethernet through rack CPU-M card (VibroSight upper software)
Isolation RS-485 multi station serial port (optional onboard): baud rate 19200/38400, maximum transmission distance 1220m, isolation withstand voltage 50V; only supports old version 501X software
Backplane bus: Raw Bus raw signal bus, Tacho Bus speed bus, can directly take signals from the backplane without external wiring
5、 Power specifications
Board power supply:+5V DC ± 5%,+12V DC, -12V DC
Power consumption:+5V: 2W; +12V maximum 1.2W; -12V maximum 1W
6、 Environmental parameters
Working temperature: 0 ℃~+65 ℃
Storage temperature: -40 ℃~+85 ℃
Relative humidity: 0~90%, no condensation
Support hot plugging (live plugging)
EMC electromagnetic compatibility, industrial vibration monitoring protection level

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

Vibro-meter CMC16 200-530-025-014 Condition Monitoring Card | VM600 Spare Part
Vibro-meter VM600 MPC4 Machinery Protection Card | VM600 TSI Spare Part
Vibro-meter VM600 ABE040 6U System Rack | VM600 TSI Spare Rack
Vibro-meter VM600 CMC16 Communication Controller Card | VM600 TSI Spare Part
Vibro-meter VM600 IOC16T Digital I/O Interface Card | VM600 TSI Spare Part
Vibro-meter VM600 IOC4T Input Output Interface Card | VM600 TSI Spare Part
Vibro-meter VM600 RPS6U Rack Power Supply | VM600 TSI Spare Part

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550