Core electrical parameters
Project specifications
Input power supply AC 110-230V single-phase/three-phase, 50-60Hz
DC bus DC 160-340Vdc; Under voltage 90VDC, over-voltage 430VDC protection
Continuous output current 6.2 Arms rms
Peak output current 18.6 Arms rms (maximum 3 seconds)
The maximum power of the adaptive motor is about 1.8kW (230V servo motor)
PWM carrier frequency up to 16kHz
Full digital control loop; Current loop 16kHz; Speed loop; Built in position ring
The instruction interface SynqNet is mainly based on the real-time motion bus; Backup: ± 10V simulation; Pulse+direction; RS232 debugging port
Feedback support for Resolvers, Rotary Transformers, and Incremental Encoders (A/B/Z); Support sine encoder; Does not support Hiperface/EndAt absolute values
There is no built-in braking resistor for braking, and an external regenerative braking resistor must be connected
Encoder maximum frequency 3MHz, maximum cable 15m
Mechanical and environmental factors
Cooling: Natural convection heat dissipation, fanless
Dimensions: Width 83.3 x Height 163 x Depth 140 mm
Net weight: approximately 1.3 kg
Protection: IP20 (installed inside the cabinet)
Working temperature: 0-55 ℃
Certification: UL508C, CE
Software&Motor Adaptation
Debugging software: MotionLink (old version); The new version of WorkBench does not support CD SynqNet models
Suitable motor: AKM-E winding (230V level); Unable to drive AKMxxG (400V winding motor), insufficient bus voltage, limited speed
Feedback solver must return to zero when powered on, without absolute value position memory

KOLLMORGEN CE03550 Servo Diver