Vibro-meter 254-772-010-064 Rack Redundant Power Module

Basic Information
Part number: 254-772-010-064
Model: RPS6U
Brand: Vibro Meter (Meggitt/Parker Meggitt)
System ownership: VM600 Mechanical Protection+Condition Monitoring System (MPS/CMS)
Installation: 6U 19 inch rack front slot, leftmost power slot of rack, supports hot swapping
Purpose: To provide multiple DC channels for the rack backplane, supplying power to all boards such as MPC4, IOC4T, CMC16, CPUR, etc
Electrical specifications (AC input version, this model)
Communication input: 90-264VAC, 48-65Hz, wide voltage globally applicable
Maximum output power: 330W
Backplane DC output:
+5VDC， Rated 35A
+12VDC， Rated 6A
-12VDC， Rated 2A
Voltage stabilization accuracy: Voltage stability under full load ≤ ± 0.2%; 20MHz bandwidth ripple ≤ 50mVpp
Protection: overvoltage, short circuit, overload current limiting protection
Input/output isolation: Built in isolation to suppress common mode interference and protect the measurement board
Redundancy mode: Dual power supply parallel 1+1 redundancy, load carried by a single power supply, power not stacked; Single fault undisturbed switching without interrupting the system
Power outage maintenance: Short term power outage can maintain MPC4 protection card from resetting (duration depends on the number of cards in the rack)
environmental parameters
Working temperature: -25 ℃~+65 ℃; Starting from 50 ℃, the output will be downgraded
Storage temperature: -40 ℃~+85 ℃
Relative humidity: 5% to 95%, no condensation
Vibration: IEC 60068-2-6, 10-2000Hz, 2g rms
Impact: IEC 60068-2-27, 50g, 11ms
Mechanical and status indication
Appearance: 6U, 482.6mm (W) × 261.6mm (D) × 131.8mm (H)
Weight: Approximately 2.2kg
Front panel LED indicator light:
IN: Input power supply is normal
+5V/+12V/-12V: Corresponding to normal DC output of each channel
Certification and industry adaptation
Certification: CE, UL
Applicable scenarios: protection systems for steam turbines, gas turbines, compressors, and large pump units, in compliance with API670 rotating machinery monitoring standards

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

Vibro-meter SIM-275D-48 200-582-300-011 Power Supply Module

Vibro-meter 204-691-000-021 Vibration Processor Module

Vibro-meter 200-570-000-111 Processor Module

Vibro-meter 200-560-000-113 Processor Module

Vibro-meter 200-595-100-014 Processor Module

Vibro-meter 200-500-110-014 System Rack

Vibro-meter 204-040-100-012 System Rack

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550