Vibro-meter 200-560-000-113 Processor Module

Core technical parameters
hardware
Board specification: 6U Eurocard VME board, supports hot swapping
Processor: ARM Cortex-R4 180MHz real-time core
Memory: 1MB RAM, 8MB onboard Flash, supports micro SD expansion up to 32GB
Power supply: DC24V provided by the rack backplane
Power consumption: Typical 4.1W, maximum 5.3W (SD card write peak)
Weight: Approximately 360g
Front panel: equipped with LCD status display screen, navigation buttons, debugging serial port, and network port indicator lights, allowing for direct viewing of rack status and alarm information on-site
Communication interface
Dual independent RJ45 Ethernet (dual MAC, 10/100Mbps, redundant networking)
Protocol: Modbus TCP, supporting OPC-UA and SNMP v3; Compatible with VibroSight and MPSx configuration software
Backplane bus: VME bus+VM600 dedicated Raw, Tacho, OC bus, high-speed synchronous data acquisition with MPC4, CMC16 and other boards
RS232 local debugging serial port, used for firmware upgrade, on-site diagnosis, and local configuration download
Data and Event Management
Local flash storage event logs: alarms, trips, configuration changes, sensor failures, board self-test failures, with high-precision timestamps
Unified whole rack sampling synchronization, coordinated MPS protection channel (MPC4) and CMS vibration acquisition channel (CMC16)
Cache trends and time-domain waveforms, upload to VibroSight for rotor fault diagnosis
Support online configuration modification, parameter verification, hardware BIST power on self-test
System functions
Rack hardware management: automatically identify all boards in the rack and continuously diagnose hardware
MPS protection logic management: protection threshold, alarm latch, trip logic, relay output management, meeting API670 rotating machinery protection standard
CMS gateway: Summarize the spectrum, order, and vibration waveform data collected by CMC16 and forward it to the upper computer for external communication
System fault diagnosis: Sensor disconnection, board failure, power supply abnormality, report to DCS/SCADA system
Environmental and Safety Certification
Working temperature: 0 ℃~+60 ℃
Storage temperature: -40 ℃~+85 ℃
Relative humidity: 5% to 95% RH, no condensation
EMC：IEC 61000-6-2 / IEC 61000-6-4
The entire system meets SIL2 functional safety certification, CE certification, and is compatible with API 670 standard
Protection level IP20 (installed inside the rack) Konmask

Our products are widely used in CNC mechanical metallurgy, petroleum and natural gas, and petrochemical industries,
Chemical industry, paper and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing,
Plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution.
The quoted price is not the actual price. Please contact the shopkeeper before placing the order to confirm the price and delivery time!!!

Recommended other models：

Vibro-meter 200-530-022-014 VM600 16 Channel Status Monitoring Card

Vibro-meter 200-560-000-112 MPC4 Machinery Protection Card

Vibro-meter 200-595-067-114 Conformal Coating Card

Vibro-meter 200-560-000-011 MPS Machinery Protection Card

Vibro-meter 200-530-025-014 Conformal Coating Card

Vibro-meter 200-595-045-114 Conformal Coating Card

Vibro-meter 200-595-046-114 VM600 16 Channel Status Monitoring Card

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

contact information:

Email: changxin2025@gmail.com
Contact phone number: 15359213550