Electrical parameters

Project parameter model PRD -0030030Z -35, CE03250 input power supply 115-230VAC, single-phase/three-phase, 50-60Hz apparent power 1.4   kVA continuous output current 6.2   A (RMS) peak output current 12.4   A (short-term) DC bus overvoltage protection 430   VDC DC bus undervoltage protection 90   VDCPWM switch frequency up to 16   kHz Saul Elect… Logic power supply can be connected to 24   VDC independent power supply Saul Elect

control performance

Control mode: torque, speed, position closed-loop; ± 10V analog command, pulse direction command, serial command Saul Elect

Current loop update cycle: 62.5 μ s (16 kHz)

Speed loop update cycle: 250 μ s (4 kHz)

Position loop update cycle: 500 μ s (2 kHz)

Speed closed-loop bandwidth: up to 400 Hz

Feedback support: incremental encoder, Hall sensor; Resolving requires an external 24V logic power supply to support Saul Elect

interface

Serial: RS-232/RS-485, MOTIONLINK debugging software Saul Elect

Simulation command: ± 10 VDC

Digital I/O: isolated digital input/output

Encoder interface, motor power, brake resistor interface

Protection function

Output phase to phase short circuit, overvoltage, undervoltage, overcurrent, driver overheating, motor overheating, feedback loss, I ² t current reversal protection Saul Elect.

Machinery and Environment

Installation: Panel installation, natural air cooling (without built-in fan)

Working temperature: 0-45 ℃; Storage -20-70 ℃

Humidity: 10-90% RH, no condensation

Certification: CE

Adapted motor

Kollmorgen AKM series brushless servo motors are suitable for motors with a power range of approximately several hundred watts to 1.4 kVA.

Kollmorgen PRD-AMPB25EZ-00 Servostar Servo Drive